| Main parameters |
| 1. Model: SH-15 |
| 2. Type: needle plate type chain, vertical
(or horizontal) rail |
| 3. Sizing set: For both use of slurry scraping
and slurry rolling, which is provided with fine adjusting device and
achieve a uniform sizing. |
| 4. Working tread width: 1700mm |
| 5. Working speed: 6-60M/Min or 6-80M/Min |
| 6. Thermal source of drying case: Conducting
oil heat exchanger, automatic temperature control and digital table
display. |
| 7. Length of drying case: 12M or 15M |
| 8. Main motor configuration: 5.5kwX2+7.5kwX1+15kwX1
frequency conversion timing motor, both single acting or joint acting. |
| |
